The TS-CIM control input module is a BriteBox™ expansion control module that allows the Tank Sentinel® automatic tank gauges (ATGs) to accept alarm signals from other systems and generate appropriate alarms in the ATG during emergencies. Not available on TS-750 consoles.

Features

• Economical control module for control and alarm conditions.
• Provides additional leak test inhibit function when used with backup generator ATG configurations.
• Accepts up to eight input signals. Contains input/output system which can be equipped with up to eight optically isolated plug-in modules that will provide an input signal to the Tank Sentinel® console when signal voltage is present.
• Input modules are available in 90-120 VAC, 3.3-32 VDC or 18-60 VDC versions.

Installation

• May be installed when Tank Sentinel® is originally installed or added later.
• BriteBox™ (5” × 7”) mounted no further than 18 inches from Tank Sentinel® console.
• Wiring: Ten conductor BriteBus™ ribbon cable run through ¾” flexible or rigid conduit connecting Tank Sentinel® console to BiteBox™ enclosure. (Optional TS-KB installation kit recommended.)
• Wiring from the external device circuits is connected to the field terminal strip in the TS-CIM.

Ordering Information

Note:

• Up to four BriteBoxes™ can be connected to the console (two SEM’s, one TS-ROM and one TS-CIM1 can be connected).
• One TS-ROM BriteBox™ is typically used for positive pump shutdown when certain alarms occur.
• Order one TS-KB install kit for each BriteBox™ (includes ribbon cable, flexible conduit and fittings).